Permatex® Anaerobic Gasket Maker

Brand: PERMATEX

Features and Benefits:

OEM specified. Noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015″ and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service. Old gasket material can be removed in minutes with a simple putty knife.

DIRECTIONS:

TO MAKE A GASKET:

Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
Spray Permatex^® Surface Prep^™ activator on one surface only. Allow to dry 1-2 minutes.
Apply a continuous bead of sealant to the unprimed surface.
Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped away with a cloth and shop solvent.

TO DRESS A GASKET:

Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
Spray Permatex^® Surface Prep^™ activator to both flange surfaces. Allow to dry 1-2 minutes.
Completely cover both sides of the precut gasket with sealant.
Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.

Automobile:

Suggested Applications: Water pumps, thermostat housings, transmission pans, transmission case covers, engine cases, timing covers, and transaxle casings.

View Permatex® Anaerobic Gasket Maker SDS HERE

View Permatex® Anaerobic Gasket Maker Product Information HERE

Category: Gasketing