Back To Gasketing

Permatex® High Temperature Anaerobic Flange Sealant

Brand: PERMATEX

Features and Benefits:

A high temperature sealant specially engineered for making or dressing gaskets in rigid assemblies. Able to withstand temperatures to 400°F (204°C), fills gaps up to 0.020” (primed) and permits clamping loads to be maintained for strong, leakproof assemblies.

DIRECTIONS:

TO MAKE A GASKET:

  1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
  2. Spray Permatex® Surface Prep activator on one surface only. Allow to dry 1-2 minutes.
  3. Apply a continuous bead of sealant to the unprimed surface.
  4. Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped awaywith a cloth and shop solvent.

TO DRESS A GASKET:

  1. Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
  2. Spray Permatex® Surface Prep activator to both flange surfaces. Allow to dry 1-2 minutes.
  3. Completely cover both sides of the precut gasket with sealant.
  4. Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.

Automobile:

Suggested Applications: Water pumps, thermostat housings, engine cases, timing covers, transmission pans, transmission case covers, and transaxle casings.

p65warnings

View Permatex® High Temperature Anaerobic Flange Sealant SDS HERE

View Permatex® High Temperature Anaerobic Flange Sealant Information HERE