Products

Product categories

Product tags

Brands

Permatex® Gear Oil RTV Gasket Maker

Gasketing

Features and Benefits:

OEM specified. Specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases. Because gear oil has friction modifiers that break down normal RTV and cause leaking, this specialty silicone has been tested to OEM specifications to ensure complete sealing. As a gasket maker, it seeks and seals leak paths that cut gaskets cannot. It can also be used to seal cut gaskets.

DIRECTIONS:

For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex^® Brake & Parts Cleaner.
Cut nozzle to desired bead size gaskets are best formed using a 1/16″ to 1/4″ (2 to 6 mm) bead.
Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.
Replace cap after use.

Note: Not recommended for use on head gaskets or parts in contact with gasoline. Store below 80°F (27°C).

Automobile:

Suggested Applications: Differentials and transfer cases.

View Permatex® Gear Oil RTV Gasket Maker SDS HERE

View Permatex® Gear Oil RTV Gasket Maker Information HERE

Permatex® Heavy Duty Radiator Cleaner

Parts Cleaners

Features and Benefits:

Removes rust and scale from automotive engines, radiators and water jackets. Cleans and unclogs steam cleaner coils and boiler tubes. Not for use in aluminium radiators.

DIRECTIONS:

Drain radiator. Flush. Fill radiator with clean water, leaving room for radiator cleaner bottle contents (i.e. 32 fl. oz.).
Idle engine fast.
Add entire contents of this bottle. Run engine hot for 30 minutes. Do not let boil and do not drive car.
Drain system and flush thoroughly with clean water. Replace with coolant.
For optimal performance, add Permatex® Radiator and Water Pump Lubricant Permatex No. 38M (Item# 80039).

Note: Since this product is concentrated, the solvent may uncover leaks previously sealed by rust and scale. In the event this occurs, use Permatex® Quick Solder™Radiator Repair, Item# 12195, or ALUMA SEAL® Radiator Stop Leak, Item# 28179 or Item# 28181.

Automobile
Suggested Applications: Radiators, water jackets, industrial and maintenance applications.

View Permatex® Heavy Duty Radiator Cleaner SDS Here

Permatex® High Tack™ Gasket Sealant

Gasketing

Features and Benefits:

Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive remains tacky indefinitely can be applied in advance for convenience in assembly. Remains effective at temperatures of -65°F to 500°F (-54°C to 260°C). Sensor-safe. Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.

DIRECTIONS:

Apply a thin, even coat of High Tack^™ to all surfaces. Cover all threads. Allow to set a few minutes before assembly. For convenient assembly, coat gaskets and bolts in advance. High Tack^™ can be removed with lacquer thinner. Keep tightly closed.

Automobile:

Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; Spray-A-Gasket^® seals all felt, cork, metal, paper, and rubber.

Package Sizes: 4 oz. brush-top can, 16 oz. brush-top can

View Permatex® High Tack™ Gasket Sealant SDS HERE

View Permatex® High Tack™ Gasket Sealant Product Information HERE

Permatex® High Tack™ Spray-A-Gasket™ Sealant

Gasketing

Features and Benefits:

DIRECTIONS:

Shake well. Spray a thin, even coat on flange surfaces, both sides of gasket and bolt threads. Allow to set for a few minutes before assembly.

Automobile:

Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; Spray-A-Gasket^® seals all felt, cork, metal, paper, and rubber

Motorcycle:

Suggested Applications: Clutch release cover, cylinder head gaskets

Package Sizes: 6 oz. aerosol can, 4 oz. net wt., 12 oz. aerosol can, 9 oz. net wt.

View Permatex® High Tack™ Spray-A-Gasket™ Sealant SDS HERE

View Permatex® High Tack™ Spray-A-Gasket™ Sealant Product Information HERE

Permatex® High Temperature Anaerobic Flange Sealant

Gasketing

Features and Benefits:

A high temperature sealant specially engineered for making or dressing gaskets in rigid assemblies. Able to withstand temperatures to 400°F (204°C), fills gaps up to 0.020” (primed) and permits clamping loads to be maintained for strong, leakproof assemblies.

DIRECTIONS:

TO MAKE A GASKET:

Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
Spray Permatex^® Surface Prep^™ activator on one surface only. Allow to dry 1-2 minutes.
Apply a continuous bead of sealant to the unprimed surface.
Assemble mating surfaces with minimal lateral movement. Excess sealant can be wiped awaywith a cloth and shop solvent.

TO DRESS A GASKET:

Clean both flange surfaces. Remove paint, dirt, grease or old gasket completely.
Spray Permatex^® Surface Prep^™ activator to both flange surfaces. Allow to dry 1-2 minutes.
Completely cover both sides of the precut gasket with sealant.
Place coated gasket on flange, and assemble mating surfaces with minimal lateral movement.

Automobile:

Suggested Applications: Water pumps, thermostat housings, engine cases, timing covers, transmission pans, transmission case covers, and transaxle casings.

View Permatex® High Temperature Anaerobic Flange Sealant SDS HERE

View Permatex® High Temperature Anaerobic Flange Sealant Information HERE

Permatex® High-Temp Red RTV Silicone Gasket Maker

Gasketing

Features and Benefits:

OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65ºF to 650ºF (-54°C to 343°C) intermittent; resists auto and shop fluids.

DIRECTIONS:

For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex^® Brake & Parts Cleaner.
Cut nozzle to desired bead size gaskets are best formed using a 1/16″ to 1/4″ (2 to 6 mm) bead.
Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions.
Clean uncured silicone from hands, tools and clothing with Fast Orange^® Hand Cleaner.

Note: Not recommended for use on head gaskets or parts in contact with gasoline.

Automobile:

Suggested Applications:Valve covers, oil pans, timing covers, and thermostat housings.

View Permatex® High-Temp Red RTV Silicone Gasket Maker SDS HERE

View Permatex® High-Temp Red RTV Silicone Gasket Maker Information HERE

Permatex® Liquid Electrical Tape

Speciality Adhesives

Features and Benefits:

Weatherproof protectant for wiring and electrical connections. Goes on as a liquid and dries to a vinyl polymer that resists dirt, dust, chemicals, moisture, ensuring that connections stay intact. Brush-top applicator allows coverage without gaps and enables access to tight spaces that roll tape and shrink tubing can’t get to.

NOTES:
For best results, avoid direct sunlight, high humidity and breezy conditions. Follow local electrical codes when doing electrical repair work.

DIRECTIONS:

Always disconnect power before applying.
Stir well before using.
Make sure surfaces are clean and dry.
Apply liquid tape to connection or repair area. Completely coat repair area for an air and water tight seal.
Allow 10 minutes minimum between coats. A minimum of two coats is recommended.
Allow 4 hours minimum dry time before use.
Always allow liquid tape to dry completely before restoring power.

Automobile
Suggested Applications: Ignition wires, underground wiring, outdoor lighting fixtures, bilge pumps, terminal blocks, and exposed wires.

View Permatex® Liquid Electrical Tape SDS Here

View Permatex® Liquid Electrical Tape Product Information Here

Permatex® Liquid Metal Filler

Speciality Adhesives

Features and Benefits:

Easy-to-use filler can be drilled, filed, sanded and painted. Forms a long-lasting, metal-tough bond. Works on metal, wood, and concrete. Excellent adhesion to galvanised metal. Repairs cracks or porosity leaks in cast metal parts. Fills small holes, cracks, and perforations. Resists water, oil and gasoline.

DIRECTIONS:

Make sure the surface to be repaired is clean and free of oil and grease. For best results, roughen the surface slightly with sandpaper.
Pierce the seal in the head of the tube. Apply LIQUID METAL FILLER straight from the tube. If desired, use a wet putty knife or spatula to smooth out the repair.
LIQUID METAL FILLER will dry in 3 to 4 hours. For filling deep holes, apply LIQUID METAL FILLER in layers. Allow each layer to dry before adding the next.
Use Acetone or nail polish remover to clean up excess LIQUID METAL FILLER.

Automobile
Suggested Applications: Oil pans, stake bed holes, door panels, and cast metal parts.

View Permatex® Liquid Metal Filler SDS Here

View Permatex® Liquid Metal Filler Product Information Here

Permatex® Marine H2 Hold Epoxy

Epoxy & Adhesives

Features and Benefits:

Permatex® Marine H2 Hold Epoxy bonds underwater applications without breaking and can be used on both under and above water repairs. This industrial strength waterproof epoxy is ideal for surfaces exposed to salt or freshwater such as portable water tanks, fuel tanks, drains, boats, and more!

Flexible water-proof adhesive
Sticks and cures underwater
Shock and vibration resistant
Dries off-white
Sets in 15 minutes/ Cures in 1 hour
PSI Strength: 4,000

Suggested Applications: Fiberglass, plastics, metal, wood, PVC & more!

Directions:

For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired.
Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and pull plunger back slightly (1/8″). Allow air bubbles to rise to top. Snap off and save storage cap.
Push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface such as a piece of cardboard or the plastic container on the front of this package. Pull back plunger to stop flow.

MIX THOROUGHLY with paddle provided. Epoxy has a working time of 15 minutes.
Apply to surfaces to be joined or repaired. Epoxy will fixture in 1 hour and fully cure in 24 hours. Wipe nozzle clean. Replace cap for storage.
NOTE: Will not bond to polyethylene or polypropylene plastics.

View Permatex® Marine H2 Hold Epoxy SDS Part One Here

View Permatex® Marine H2 Hold Epoxy SDS Part Two Here

View Permatex® Marine H2 Hold Epoxy Product Information Here

Permatex® MotoSeal® 1 Ultimate Gasket Maker Grey

Gasketing

Features and Benefits:

For two and four cycle engines. Solvent-based bond fully seals within 20 minutes. Forms a tough flexible bond that is highly effective on irregular and uneven joint surfaces. Resists gasoline and other damaging fluids. Withstands temperatures 350°F (177°C) continuous, 400°F (204°C) intermittent.

DIRECTIONS:

Make sure that surfaces to be sealed are clean and oil free.
Apply a continuous bead of MotoSeal^™ 1 to both surfaces of parts to be sealed.
Smooth material with small brush.
Wait about one (1) minute then mate parts together.
Bolt parts using normal torque specifications.

Automobile:

Suggested Applications: Transmission case halves, valve covers, center and end covers (transmissions), crank case halves, cam covers, timing chain cases, primary drives, side covers, and clutch housings.

Motorcycle:

Suggested Applications: Case halves, carburetor gaskets

View Permatex® MotoSeal® 1 Ultimate Gasket Maker Grey SDS HERE

View Permatex® MotoSeal® 1 Ultimate Gasket Maker Grey Information HERE

Permatex® Nickel Anti-Seize Lubricant

Lubricants

Features and Benefits:

Protects metal parts from seizing and galling at temperatures up to 2400°F (1316°C). It is recommended where copper contamination must be avoided, under conditions of extreme pressure and temperature, and with stainless steel, titanium and nickel alloys.

DIRECTIONS:

STIR WELL BEFORE USING.

For best results, remove dirt, oil and grease.
Apply Anti-Seize lubricant to parts that require protection.
Wipe away excess lubricant.

Refer to Technical Data Sheet for additional information.

Automobile:

Suggested Applications: Exhaust manifold bolts, exhaust system bolts, muffler clamps and tailpipe assemblies.

Package Sizes: 8 oz. brush-top bottle, 0.5 oz. tube carded, 16 oz. brush-top bottle

View Permatex® Nickel Anti-Seize Lubricant SDS HERE

View Permatex® Nickel Anti-Seize Lubricant Product Information HERE

Permatex® Non-Chlorinated Brake & Parts Cleaner

Parts Cleaners

Features and Benefits:

Penetrates, dissolves and removes dirt and oil from brake systems and metal parts. Safer for aluminium. Leaves no contaminant-attracting residue or chlorinated solvent run-off. Helps manage EPA halide limits.

DIRECTIONS:

Protect painted surfaces and all parts made of plastic and rubber from overspray.
Hold can upright, and spray all parts to be cleaned liberally.
Allow to air dry, or wipe dry.
Repeat application if necessary.

Automobile
Suggested Applications: All brake systems, C.V. joints, machinery, tools, and farm equipment.

View Permatex® Non-Chlorinated Brake & Parts Cleaner SDS Here

Permatex® OPTIMUM BLACK Gasket Maker

Gasketing

Features and Benefits:

OPTIMUM BLACK combines maximum oil resistance with maximum flexibility. Today, we see components changing and unlike materials meeting (plastic/steel, aluminum/steel, etc.), all with different rates of expansion and contraction. In addition, with technology advancing, regulations and requirements tightening, we see thinner metals, fewer fasteners, and wider spread bolt patterns. The strength and flexibility of OPTIMUM BLACK handle the changes and added stresses that exist between today’s lightweight, high performance, and premium component assemblies. OPTIMUM BLACK is sensor safe, low odor, and non-corrosive with resistance to oil, shop fluids, and vibration. It is one of the most advanced, maximum flex, maximum oil resistant RTV silicone gasket makers available.

Maximum Flexibility: assemblies where dissimilar metals meet
Maximum Oil Resistance
High Temperature performance up to 500°F
Sensor-Safe, Low Odor, Non-Corrosive

DIRECTIONS:

For best results, surfaces should be clean and dry.
Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Let dry for one hour then tighten to torque specifications.
Allow 24 hours to fully cure before filling with fluids or returning to service.
Replace cap after use.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

OPTIMUM BLACK Suggested Applications:

Oil Pans, Timing Cover, Transmission, Differential Cover

View Permatex® OPTIMUM BLACK Gasket Maker SDS HERE

View Permatex® OPTIMUM BLACK Gasket Maker Product Information HERE

Permatex® OPTIMUM GREY Gasket Maker

Gasketing

Features and Benefits:

OPTIMUM GREY combines maximum rigidity and maximum torque load and vibration resistance with extreme temperature resistance: -65°F to 700°F (-54°C to 371°C) intermittent, expanding uses and applications. Designed for max performance applications common in import & late model engines and component upgrades. It is sensor safe, low odor, and non-corrosive. The maximum rigidity and maximum torque load feature combination joined with outstanding resistance to oils, coolant, and shop fluids make OPTIMUM GREY one of the most versatile gasket makers available.

Maximum Rigidity
Maximum Torque Load & Vibration Resistance
Sensor-Safe, Low Odor, Non-Corrosive
High Temperature performance up to 700°F

DIRECTIONS:

For best results, surfaces should be clean and dry.
Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Let dry for one hour then tighten to torque specifications.
Allow 24 hours to fully cure before filling with fluids or returning to service.
Replace cap after use.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

OPTIMUM GREY Suggested Applications:

Valve Cover, Water Pump, Intake Manifold End Seals, Thermostat Housings

View Permatex® OPTIMUM GREY Gasket Maker SDS HERE

View Permatex® OPTIMUM GREY Gasket Maker Product Information HERE

Permatex® OPTIMUM RED Gasket Maker

Gasketing

Features and Benefits:

Permatex’s New Optimum Red RTV gasket maker provides maximum temperature performance up to 750°F intermittent. The advanced formulation allows for a sensor-safe, low odor and non-corrosive performance and is resistant to oil and common shop fluids. Permatex^® Optimum Red also resists aging, weathering and thermal cycling without hardening, shrinking or cracking.

Maximum temperature performance, adhesion, and flexibility
Sensor-safe, low odor and non-corrosive
Non-flammable and non-toxic
OEM Specified and meeting performance specs of OE silicone gaskets
Maximum Temperature performance up to 750°F (399°C) intermittent

DIRECTIONS:

For best results, surfaces should be clean and dry.
Cut nozzle and apply a continuous 1/16″ to 1/4″ (2 to 6mm) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange.
Let dry for one hour then tighten to torque specifications.
Allow 24 hours to fully cure before filling with fluids or returning to service.
Replace cap after use.

NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.

OPTIMUM RED Suggested Applications:

Header, Exhaust Manifold, Turbocharge, Slip-fit Exhaust

View Permatex® OPTIMUM RED Gasket Maker SDS HERE

View Permatex® OPTIMUM RED Gasket Maker Product Information HERE

Permatex® Paint Stripper

Cleaners & Degreasers

Features and Benefits:

Permatex^® Paint Stripper is a solvent-based stripper specifically designed to quickly strip and remove unwanted paint from metal surfaces in as little as 15 minutes. It will cling to vertical surfaces and eliminate costly and time-consuming sanding and scraping.

Caution: Do not use to remove paint splatter from painted surfaces or on plastic surfaces. This product will remove paint.

Eliminates time consuming scraping and sanding
Clings to vertical surfaces
Top Applications: Bumpers, Windows, Windshields

DIRECTIONS:

DISINFECTING:

Shake well and test on an inconspicuous area.
Apply Decal & Adhesive Remover directly to bumper sticker or label.
Immediately wipe off any overspray
Allow a few minutes for adhesive to dissolve.
Use Permatex Safer Scraper™ to remove sticker. Apply more Decal &
Adhesive Remover as needed.
Eliminate any remaining residue and wipe clean.

Automobile

Suggested Applications: Various types of paint.

View Permatex® Paint Stripper SDS Here

View Permatex® Paint Stripper Product Information Here

Permatex® PermaShield™ Fuel Resistant Gasket Dressing & Flange Sealant

Gasketing

Features and Benefits:

Specially formulated for superior fluid resistance, this polyester urethane based gasketing compound withstands extreme temperature changes without hardening. Its non-setting, non-hardening character remains tacky even with rapid changes in temperature, enabling repeated assembly and disassembly of parts. Suitable as either a gasket maker or dressing, PermaShield^™ seals surface imperfections between metal parts and is ideal in high performance applications. With an operating temperature range of -60° to 500°F (-50° to 260°C), this compound resists common engine fluids, including oil, gasoline, ethanol, water and anti-freeze and prevents contamination from moisture and dust.

DIRECTIONS:

Clean and dry surfaces.
Apply thin film or bead to both surfaces.
Allow ample drying time to completely evaporate the solvent.
Assemble and torque to manufacturers specifications. Seals instantly. May return equipment to service immediately. Replace cap after use. Store below 100°F (38°C).

Automobile:

Suggested Applications: Axle assemblies, hydraulic parts, differential covers, oil pans (cast), water pumps, bearing caps/brackets, gearboxes, hydraulic equipment covers, intake manifold gaskets, and valve cover gaskets.

View Permatex® PermaShield™ Fuel Resistant Gasket Dressing & Flange Sealant SDS HERE

View Permatex® PermaShield™ Fuel Resistant Gasket Dressing & Flange Sealant Product Information HERE

Permatex® Plastic Welder™

Epoxy & Adhesives

Features and Benefits:

A structural adhesive designed for general purpose bonding of a wide variety of material such as hard and soft plastics to specified surfaces. Forms a tough, durable bond to most plastics, composites, ceramics, wood in any combination. Fast curing product with gelling of mixed adhesive in 5 6 minutes and fixturing in 9 10 minutes. NOTE: Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers, sets in five minutes at room temperature. Cream appearance. Gap filling to 0.125 inch. Water resistant and good chemical resistance. Temperature range -60°F to 250°F (-51°C to 121°C). Permanent strength up to 3500 PSI.

DIRECTIONS:
PROTECT: Work area must be protected from accidental spills.
CLEAN: Surfaces must be clean, dry and free of grease and oil.
PREPARE: Roughen smooth surfaces (using abrasives or sandpaper)
OPEN PACKAGE: Remove syringe. Using a sharp blade, cut off tips of both nozzles.
DISPENSE: Depress plunger to dispense Part A and Part B. Mix thoroughly on a clean, discardable surface for 2 to 3 minutes until evenly coloured.
APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (working time is approximately 5 min.). Remove any excess Plastic Weld immediately.
CURE TIME: Usable strength is reached in four hours at 72°F (22°C). Cooler temperature may require longer set time.
CLEAN-UP: Attach nozzle cap and store in moulded tray. NOTE: Adhesive will not bond most polyethyleneor polypropylene plastics.

Automobile
Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. Use for interior trim, fills cracks, bonds most plastics, and bonds plastic to vinyl.

View Permatex® Plastic Welder™ Part One SDS Here

View Permatex® Plastic Welder™ Part Two SDS Here

View Permatex® Plastic Welder™ Product Information Here

Permatex® Pro-Strength Brake & Parts Cleaner

Parts Cleaners

Features and Benefits:

Specifically formulated to aggressively remove oil, grease, brake fluids, oxidised oils (gum) and asphalt from all types of brakes and other automotive parts. It penetrates through dirt and corrosion and flushes them away, eliminating the need to disassemble. It leaves no residue, dries fast and is non-corrosive to metals. Developed for brake professionals. Contains no ODCs. Level 1.

DIRECTIONS:

Protect painted surfaces, C.V. boots and all parts made of plastic and rubber from overspray.
Shake well.
First spray the surfaces gently from a distance to wet down hazardous surface dust (which may still contain asbestos fibers and other harmful particles) to prevent them from becoming airborne.
Then they can be more safely flushed down and off the parts without being breathed.
Hold can upright and spray liberally on all parts to be cleaned.
Allow to air dry or wipe with soft cloth.
Repeat application if necessary.

Automobile
Suggested Applications: All brake systems, C.V. joints, machinery, tools, and farm equipment.

Motorcycle
Suggested Applications: All brake systems, drums, calipers, discs, shoes, pads, cylinders, and any degreasing project.

Heavy Duty
Suggested Applications: Dissolves grease, dirt and oil from parts on chassis. Prepares mating surfaces for Permatex® products.

View Permatex® Pro-Strength Brake & Parts Cleaner SDS Here

Permatex® RTV Silicone Dissolver

Gasketing

Features and Benefits:

OEM approved. This patented gel formula dissolves and completely removes RTV silicone residue in only a matter of minutes…letting the powerful chemical do the work for you. No grinding required. It’s also safe for use on aluminum and other surfaces such a metal or plastic.

DIRECTIONS:

Remove heavy silicone residue using Permatex^® SaferScraper^™.
Spread liberally on surface and let stand for several minutes to soften gasket material.
Allow longer contact time for thick layers.
Wipe material with a clean rag or scrape from surface with Permatex^® SaferScraper^™.
Repeat if necessary until surface is free of gasket material.

NOTE: Does not work on non-silicone gasket residue.

Automobile:

Suggested Applications: Removes residue from all Permatex^® silicones, including the Right Stuff^™, Ultra Series and RTV products.

Your Cart

Products