No products in the cart.
Products
Permatex® Chain Lube
Features and Benefits:
Cleans, lubricates, extends life and protects all types of roller chains, gears and cables that operate under exposed conditions. Easy-to-apply foaming action assures effective application. Repels dirt, sand, dust. Minimal “throw off”. Contains no ODCs. Level 3*
DIRECTIONS:
Shake well. Spray chain lube slowly along full length of chain. Run chain on sprockets to ensure coverage.
Automobile:
Suggested Applications: Ideal for any chain-driven tool or vehicle such as motorcycles, mopeds, chainsaws, lawnmowers, and bicycles.
Motorcycle:
Suggested Applications: Ideal for any chain-driven tool or vehicle such as motorcycles, mopeds, chainsaws, lawnmowers and bicycles
Permatex® Contact Cement
Features and Benefits:
Makes a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces. Instantly bonds rubber to glass and metal. Heat and water resistant. Easy-to-use. Requires no clamping.
DIRECTIONS:
- Surfaces should be clean, dry and free of oil.
- Apply uniform coat to both surfaces. Wait ten minutes. MAKE SURE THAT THE SURFACES ARE IN THE EXACT POSITION DESIRED! Join surfaces together.
- Clean up excess with lacquer thinner.
Automobile
Suggested Applications: Weather stripping.
View Permatex® Contact Cement SDS Here
Permatex® Copper Spray-A-Gasket® Hi-Temp Sealant
Features and Benefits:
Fast-drying, metallic copper sealant helps dissipate heat, prevents gasket burnout and improves heat transfer. Fills minor surface irregularities. Seals instantly. Fills hot spots and surface imperfections. Temperature range -50°F to 500°F (-45°C to 260°C); resists all types of automotive fluids, especially gasoline. Level 3
DIRECTIONS:
Shake well with repeated agitation. Hold can 6-10 inches away from surface, depending on width of target area. All surfaces can be pre-coated in advance for convenience. Apply to flange surfaces, both sides of gasket and bolt threads. Wait 30 seconds between coats to allow surface to become tacky.
Automobile:
Suggested Applications: Cylinder head gaskets, exhaust manifold gaskets, and other high-temperature applications.
Marine:
Suggested Applications: Cylinder head gaskets, carburettor gaskets, exhaust manifold gaskets and other high-temperature applications
Permatex® Disc Brake Quiet
Features and Benefits:
Stops brake squeal by dampening vibration at caliper/brake pad interface. Provides tighter fit and allows for easier disassembly. Protects against corrosion. Compatible with anti-lock brake systems. This product contains an elastomeric polymer for use with brake pads not having anti-squeal shims. Aerosol – Level 3*
DIRECTIONS:
Shake well. Apply to metal backs of new brake pads; or remove squeaking pads from caliper, clean with Permatex® Brake and Parts Cleaner and apply to pad backing.
DO NOT APPLY TO FRICTION SIDE OF PADS, caliper, rotors or other moving mechanisms. Allow to set for 10 minutes and reassemble. May install while tacky.
Automobile:
Suggested Applications: Automotive disc brakes, out board and inboard pads for disc braking systems, disc brake pads without anti-squeal shims.
Package Sizes: 12 oz. aerosol can, 9 oz. net wt., .5 fl. oz. (2 -.25 fl. oz. pouches) carded
Permatex® Electrical Contact & Parts Cleaner
Features and Benefits:
Suited for cleaning electrical and electronic devices, this fast evaporating, noncorrosive cleaner leaves no residue. It removes grease, dirt, oil, flux and other surface contaminants. Designed to be an alternative to CFC-113, 1,1,1-trichloroethane and perchloroethylene solvents.
DIRECTIONS:
- Read entire label before using this product.
- DO NOT apply to energised equipment or where there is a residual electrical potential from a component such as a capacitor.
- Hold can 6 8 inches from surface to be cleaned.
- Spray surfaces to be cleaned.
- Extension tube may be used for pinpoint application.
- For stubborn residues, repeat application.
- For difficult to reach areas, swabs or lint free cloths may be used.
- Allow to dry completely before re-energising system.
Automobile
Suggested Applications: Electronic parts: circuit boards, computer components, relay switches. Electric parts: electric motors, generators, starters, pumps, motor windings, solenoids, and compressors.
Marine
Suggested Applications: Electronic parts: circuit boards, computer components, relay switches, etc.
Electric parts: electric motors, generators, starters, pumps, motor windings, solenoids, compressors, etc.
View Permatex® Electrical Contact & Parts Cleaner SDS Here
Permatex® Engine Degreaser
Features and Benefits:
New formula contains no petroleum distillates. Foaming action quickly dissolves and removes grease, oil and dirt from all types of equipment. Cleans iron, steel, aluminium, magnesium and copper. Not harmful to metal, rubber, plastic, or concrete. Rinses off easily with water. Level 3
DIRECTIONS:
- Shake well before using.
- Make sure engine is turned off and cool.
- Spray generously starting with the lower engine areas. Work towards the top of the engine. DO NOT spray directly onto alternator, distributor, electronic components and air intake systems. Care must be taken on all under hood wiring and electronic sensors.
- Immediately wipe off any overspray from external painted surfaces and plastic chrome with water dampened cloth.
- Allow Eliminator III Engine Degreaser to soak for 10 to 15 minutes. Heavy deposits of grease and grime may have to be brushed. DO NOT start engine after applying degreaser. Rinsing properly cleans engine and avoids potential fire hazards and odours.
- Rinse with a mild stream of water from the top of the engine down. Do not use power washers or heavy streams of water.
- PROTECT THE ENVIRONMENT AND USE THE MINIMUM AMOUNT OF WATER TO RINSE ENGINE. FOLLOW ALL FEDERAL, STATE AND LOCAL REGULATIONS FOR DISPOSAL OF WASTE WATER.
- After engine has been rinsed, allow to drain for a few minutes. Start engine and allow to idle for 10 to 15 minutes.
- Drive vehicle for a short period of time to completely dry engine or allow to dry overnight.
Automobile
Suggested Applications: Engines, garage floors, tools, and machinery.
View Permatex® Engine Degreaser SDS Here
Permatex® Fast Break® Super Penetrant
Features and Benefits:
Heavy-duty penetrate for rusted and frozen assemblies. Works quickly to penetrate and loosen rust, tar, grease, dirt, carbon deposits and corrosion from metal parts. Frees frozen nuts, bolts and fittings in all types of assemblies. Level 3*
DIRECTIONS:
Shake well. Protect painted surfaces from overspray. Apply a light coating of FAST BREAK® to frozen joint or part. Tap the joint to set up vibration. Parts will separate. Stubborn cases may require repeated applications or a short soaking period.
Automobile:
Suggested Applications: Lubricates to free any corroded or seized part. Penetrates rust, scale, paint, varnish, carbon, or gum.
Motorcycle:
Suggested Applications: Lubricates to free any corroded or seized part. Penetrates rust, scale, paint, varnish, carbon or gum
Permatex® Form-A-Gasket® No. 1 Sealant
Features and Benefits:
Fast-drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels.
DIRECTIONS:
Use on flanges, both sides of old or new gaskets, threaded and hose connections, cover plates and all semi permanent reassembly work. Clean surfaces thoroughly. Apply a thin, even film. Allow to air dry afew minutes until film becomes “tacky.” Then assemble and tighten into position.
Motorcycle:
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Marine:
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Permatex® Form-A-Gasket® No. 1 Sealant
Features and Benefits:
Fast-drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. Temperature range -65°F to 400°F (-54°C to 204°C); resists common shop fluids and fuels.
DIRECTIONS:
- Clean surfaces thoroughly.
- Pierce top and apply a thin, evenfilm to both mating surfaces. Allow to air dry until it becomes “tacky.”
- Assembleand tighten into position.
- Wipe excess clean. If material cures in nozzle between applications, use a pin or paper clip to remove cured plug.
Motorcycle:
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Marine:
Suggested Applications: Freeze plugs, threaded connections, manifold gaskets
Permatex® Form-A-Gasket® No. 2 Sealant
Features and Benefits:
Slow-drying, non-hardening sealant approved for use in aviation as well as automotive applications. Temperature range -65°F to 400°F (-54°C to 204°C); resists gasoline, oil and grease.
DIRECTIONS:
Use on flanges, on both sides of old or new gaskets, threaded and hose connections, cover plates and all semi permanent reassembly work. Clean surfaces thoroughly. Apply a thin, even film. Allow to air dry a few minutes until the film becomes “tacky.” Then assemble and tighten into position.
Automobile:
Suggested Applications: Suggested Applications: Valve cover gaskets, and oil pan gaskets.
Marine:
Suggested Applications: Valve cover gaskets, oil pan gaskets
Package Sizes: 11 oz. tube boxed, 1.5 oz. tube carded, 3 oz. tube carded
Permatex® Gasket Remover – Low VOC Formula
Features and Benefits:
This low VOC formulation combines powerful gasket remover strength with an innovative delivery system. Its fast-foaming action penetrates the most stubborn or baked-on gaskets in 15-20 minutes. The built-in brush-tip was designed for easy application and allows for scrubbing on intricate surfaces. This product is NOT recommended for use on silicone gaskets. Level 2
DIRECTIONS:
- Apply Gasket Remover by depressing pad to angle brush. Move brush in a circular motion ensuring all of the sealant is covered.
- Allow Gasket Remover to stand on the gasket sealant for at least (15) minutes. Removal time will vary depending on gasket sealant thickness.
- Wipe residue off with dry rag.
- Re-apply if necessary.
- Prep flange for new gasket by cleaning with Permatex® Brake & Parts Cleaner.
NOTE: Not for use on RTV silicone gaskets.
Automobile:
Suggested Applications: Removes solvent-based gasketing and gasket sealant products including all Permatex® Form-A-Gasket ®, Spray-A-Gasket®, Indian Head®, High Tack™ Gasket Sealants and Dressings, and residual gasket material.
Heavy Duty:
Suggested Applications: Engine valve connectors, oil pan covers
View Permatex® Gasket Remover – Low VOC Formula SDS HERE
View Permatex® Gasket Remover – Low VOC Formula Product Information HERE